地址:台中市南區濟世街17
TEL:886-4-22241110 FAX:886-4-22241112
BALUSTRADE/RAILING SYSTEMS

1. CABLE END FITTINGS

Tamper-Resistant Clevis Pin Style
RF3200P04
Split Ring Clevis Pin Style
RF3200-04
Microloc Turnbuckle Body
Microloc Swage Terminal
RF3210-0404
RF3211M0304
RF3210-0504 RF3211M0404
RF3210-0604 RF3211M0504
Microloc Threaded Fork
RF3250-04
RF3250P04
.
RF3220P04
RF3221PM03
RF3221PM04
Microloc Swage Fork
RF3220-04
RF3221M03
RF3221M04 RF3211M0404
Threaded Terminal Adjuster
RF5340
Tamper-Resistant Clevis Pin
RF5300-03
RF5300-04


2. BUSHES, GROMMETS & ANGLED WASHERS
PNP184
PNP185
PNP186
PNP187
PNP188
PNP189
PNP180
PNP181
PNP182
PNP183
PNP193
PNP194
RF62
PNP54A
PNP54AC
PNP54B
PNP54BBLK
PNP54C
PNP39A
PNP39B
PNP19
 
PNP54DS
PNP54DBLK
 
 
RF5351
RF5352
 
PNP240BLK
PNP240S
PNP240W
Nylon bushes provide chafe protection where wires pass through uprights.

Bushes with Stainless Steel liners offer increased abrasion resistance. They are available for various wire diameters and wall thicknesses. Low profile versions withoutmounting screws may be glued or pressed into place.

PNP54AC, PNP54B and PNP54C are suitable for mounting on round or curved surfaces, and allow threaded swage terminals for 3mm (1/8”) and 4mm (5/32”) to pass through.

Split bushes can be installed or replaced without removing the wire from the hole.

Angled washers are used to compensate for angled balustrade terminations in applications
such as stairways.

Copyright © FUJEN WIREROPE HOIST CO.,LTD. All rights reserved.  Design By Tacomall